Hikvision DS-2CD2032-I (HD 1080p PoE IP Camera)

Step 1. Prepare, you will need: 0. a router (cable modem, or other similar device) with at least one free LAN port (Internet) 1. Hikvision DS-2CD2032-I IP Camera 2. PoE Injector or PoE Switch or PoE Router (to power the camera) 3. Two RJ45 Cat5e Ethernet Cables Step 2. Connect: 1. connect the first RJ45 cable to your Internet connection (ex. Router LAN port) 1.1 connect the other end to the PoE injector (or PoE Switch). If your router has a PoE LAN port, you can skip this step 2. connect the second RJ45 cable to the PoE injector output (Power+Data OUT) 2.1 connect the other end to the Hikvision DS-2CD2032-I IP Camera Step 3. Access Setup: 1. fire up BonjourBrowser and find the IP and Port of the camera 2. create port forwarding on your router for the IP and Port 3. access the address with a web browser and change the IP address and Port after your preference, the default admin pass is admin/12345 Step 3.1 if Step 3. does not work 1. download software from Hikvision 2. access camera and set your IP and Port (default admin pass is admin/12345) 3. create port forwarding